MatteKote Sealer (5 Gal) For Concrete, Cement Tile Brick Plaster Inter./Exterior

 

FIVE GALLONS OF OLDE WORLD "MATTEKOTE"

MATTE FINISH STONE AND CONCRETE SEALER.

NEED LESS THAN 5 GALLONS?

Order a gallon or even just a quart of MatteKote Sealer elsewhere in our store.

#MTS-640 - USE TO SEAL AND PROTECT STONE, TILE, BRICKS, COBBLESTONE, PAVERS, MAN-MADE, FAUX STONE, VENEER, CEMENT, CONCRETE, AND PLASTER. PROTECTION AND PROVIDES A SLIGHT "SHEEN"... WITHOUT ALTERING THE BASE COLOR.

PRODUCT DESCRIPTION: Olde World MatteKote Sealer is a one-part modified acrylic polymer sealer that top coats and protects cementitious tiles and concrete. Olde World MatteKote Sealer seals out and beads water. Interior or Exterior, non-yellowing formula dust-proofs, helps protect from the sun, and offers a clear satin sheen. It helps protect and prolong the color and appearance of the substrate from oil, salt, sunlight, etc. This easy to apply, water-based, environmentally friendly formula cleans up with water. Do not apply if rain is imminent. Top coating with Super-Sealer Wax is recommended on interior applications.

 

APPLICATION: One two-application coat of Olde World MatteKote Sealer should be applied to tile upon removal from mold if it is to be used as an aid to curing. It may be applied to a damp or dry surface at temperatures about 50 degrees F. Apply with a sponge, “floating” the surface with the sealer. Apply in one direction, then within five minutes in the other direction. (North-South, then East-West). Saturate tile, but do not allow it to puddle on tile surface. If the tile rejects the second coating, you waited too long to apply it. It will bead up at that point. DRYING TIME: 3 hours for foot traffic, 24 hours for automobile traffic.

 

COVERAGE: Approximately 200-400 square feet per gallon depending on porosity of substrate. CLEANUP: Cleanup with water.

Olde World MatteKote Sealer beautifies brick, stone, cementitious tiles, and concrete. It seals out and beads water. Interior and exterior, non-yellowing, formula dust-proofs, helps protect from the sun, and provides a clear satin sheen. It helps protect and prolong the color and appearance of the substrate from oil, sunlight, etc.

OTHER SEALERS AVAILABLE FROM OLDE WORLD:

StoneKote: A water-based penetrating sealer that does not alter the appearance of the substrate.

GlossKote: A water-based sealer offering protection with a glossy shine.

GlazeKote: A solvent-based sealer offering protection with an ultra-glaze, deep, shine.

WE ALSO OFFER OUR COLORANTS IN ONE-POUND AND FIVE-POUND BAGS. OR YOU CAN ORDER A SPECIAL "SET OF FIVE" CONSISTING OF ONE POUND, OR FIVE-POUNDS, OF EACH OF OUR FIVE BASE COLORS.

EXPLORE OUR eSTORE FOR MOLDS, AND OTHER SUPPLIES.

Our molds are made from a special .060 H.I. industrial ABS, and can be used hundreds of times if cared for per our simple instructions.

With our process, you can make one tile or stone per day, per mold. If you have a large project, you may want to consider ordering a quantity of molds based on the number of tiles or stone needed, and your work schedule. As an example... it would take you ten days to produce 100 square feet of tile, using ten (one-square-foot) molds, 20 days using 5 molds, etc.

COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE.

WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS...

OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE...

Become an "Olde World Tile" Producer Today!

Since 1992, we've trained over 200+ entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!

SEE OUR OTHER LISTINGS AND EXPLORE OUR STORE FOR MORE MOLD STYLES AND SIZES, SUPPLIES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.

For additional product information, tile and stone installation photos, and more... visit our extensive websites or if you have questions, feel free to call or email us.