Concrete Super-Sealer Wax 1 qt For Cement, Stone, Mexican & Concrete Tile Floors

NEED MORE THAN A QUART?

Order 1 gallon or 5 gallons and SAVE even more!

USE TO PROTECT STONE, TILE, BRICKS, COBBLESTONE, PAVERS, FAUX STONE, 

VENEER, CEMENT, AND DECORATIVE CONCRETE WALKING SURFACES. 

PRODUCT DESCRIPTION:  Super Sealer Wax is a water- based acrylic & wax co-polymer which forms a tough abrasion resistant, clear, non-yellowing, top coat polish to protect existing sealers and finishes on concrete.  This co-polymer offers excellent gloss and can be stripped with conventional wax polish removers.  Its toughness protects the existing finish and acts as a sacrificial coating for the hard sealed substrate.  Super Sealer Wax resists scuffs and mars while enhancing the gloss of the finish below.  Super Sealer Wax also increases slip resistance.  It is designed to be applied on top of existing acrylic, polyurethane, and epoxy sealers.  It is used on newly sealed floors and restores shine to previously sealed concrete floors.

 

RECOMMENDED USES:  Super Sealer Wax polishes interior concrete tile and floors.  It enhances decorative systems including stained concrete floors on both newly sealed floors and to regain the luster to worn areas of previously sealed and polished floors.  Super Sealer Wax may be used in restaurants, stores, malls, office buildings, health care facilities, hotels, motels, etc… and of course, in homes.  May be “spot” applied to worn areas.

 

PREPARATION:  Floor should be clean and sealed.

 

APPLICATION:  To be used over a properly and completely sealed tile floor as a finishing coat.  Apply with lambs wool applicator, sponge, mop or airless sprayer.  2 to 3 coats may be preferred.  Allow 30 – 60 minutes between coats to dry.  Though not necessary, buffing with high speed buffing machine will maximize luster of Super Sealer Wax.  Allow a minimum of 4 hours to cure and dry before foot traffic resumes.

 

COVERAGE:  1000 square foot per gallon per coat.  2 – 3 coats may be preferred.

 

CLEAN UP:  Clean up with water immediately after use.

 

FIRST AID:  Skin = wash with water.  Eyes = flush with water.  Inhalation = not an issue.  Ingestion = drink large amounts of water.  Do not induce vomiting.  Seek medical attention.

 

NEED A TRUE CONCRETE SEALER? 

BELOW ARE SEALERS AVAILABLE FROM OLDE WORLD:

StoneKote: A water-based penetrating sealer that does not alter the appearance of the substrate. 

MatteKote: A water-based sealer offering protection with a glossy shine. 

GlazeKote:  A solvent-based sealer offering protection with an ultra-glaze, deep, shine.

WE ALSO OFFER OUR COLORANTS IN ONE-POUND AND FIVE-POUND BAGS.  OR YOU CAN ORDER A SPECIAL "SET OF FIVE" CONSISTING OF ONE POUND, OR FIVE-POUNDS, OF EACH OF OUR FIVE BASE COLORS.  CONCRETE STAINS TOO! 

EXPLORE OUR "STORE" FOR MOLDS, AND OTHER SUPPLIES.

Our molds are made from a special .060 H.I. rubberized ABS plastic and can be used hundreds of times if cared for per simple instructions. 

 COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE.

SEE SHIPPING CALCULATOR FOR YOUR SHIPPING CHARGES.

WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE...

Become an "Olde World Tile" Producer Today!

Since 1992, we've trained hundreds of entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses!  Our business is mold design and manufacturing, so our success is truly dependent on your success!

SEE OUR OTHER LISTINGS AND EXPLORE OUR STORE FOR MORE MOLD STYLES AND SIZES, SUPPLIES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.

For additional product information, tile and stone installation photos, and more... 

visit our extensive websites at OldeWorld.com or TheMoldStore.com or if you have questions, feel free to call or email us.